New Reference PMHS Tests to Assess Whole-Body Pedestrian Impact Using a Simplified Generic Vehicle Front-End

Authors: Eric Song, Philippe Petit, and Xavier Trosseille—LAB PSA Renault; Jérôme Uriot, Pascal Potier, and Denis Dubois—CEESAR; Richard Douard—Université Paris René Descartes

Abstract

This study aims to provide a set of reference post-mortem human subject tests which can be used, with easily reproducible test conditions, for developing and/or validating pedestrian dummies and computational human body models against a road vehicle. An adjustable generic buck was first developed to represent vehicle front-ends. It was composed of four components: two steel cylindrical tubes screwed on rigid supports in V-form represent the bumper and spoiler respectively, a quarter of a steel cylindrical tube represents the bonnet leading edge, and a steel plate represents the bonnet. These components were positioned differently to represent three types of vehicle profile: a sedan, a SUV and a van. Eleven post-mortem human subjects were then impacted laterally in a mid-gait stance by the bucks at 40 km/h: three tests with the sedan, five with the SUV, and three with the van. Kinematics of the subjects were recorded via high speed videos, impact forces between the subjects and the bucks were measured via load cells behind each tube, femur and tibia deformation and fractures were monitored via gauges on these bones. Based on these tests, biofidelity corridors were established in terms of: 1) displacement time history and trajectory of the head, shoulder, T1, T4, T12, sacrum, knee and ankle, 2) impact forces between the subjects and the buck. Injury outcome was established for each PMHS via autopsy. Simplicity of its geometry and use of standard steel tubes and plates for the buck will make it easy to perform future, new post-mortem human subject tests in the same conditions, or to assess dummies or computational human body models using these reference tests.

Type: Full Paper

Keywords: Biomechanics, impact, collision, pedestrian, cadaver, injury, dummy, human body model, simulation

© Stapp Association, 2017

Access Additional Papers from This Volume

View additional Full Papers from the Stapp Car Crash Journal, Volume 61.

• Analysis of Repeatability and Reproducibility Standards of ATD Response for the Correlation Method
  Authors: Lan Xu and Guy Nusholtz—FCA US LLC, USA Abstract Statistical methods, using the entire time-history, can be used to…
• Application of Extreme Value Theory to Crash Data Analysis
  Authors: Lan Xu and Guy Nusholtz—FCA US LLC, USA Abstract A parametric model obtained by fitting a set of data…
• Association of Impact Velocity with Serious-Injury and Fatality Risks to Cyclists in Commercial Truck-Cyclist Accidents
  Authors: Yasuhiro Matsui—National Traffic Safety and Environment Laboratory, Japan; Shoko Oikawa—Tokyo Metropolitan University; Kazuhiro Sorimachi, Akira Imanishi, and Takeshi Fujimura—Isuzu…
• Biofidelity Evaluation of the THOR and Hybrid III 50th Percentile Male Frontal Impact Anthropomorphic Test Devices
  Authors: Daniel Parent, Matthew Craig, Kevin Moorhouse—National Highway Traffic Safety Administration Abstract The objective of this study is to present…
• Biomechanics of Lumbar Motion-Segments in Dynamic Compression
  Authors: Mike W. J. Arun, Prasannaah Hadagali, Klaus Driesslein, William Curry, Narayan Yoganandan, and Frank A. Pintar—Department of Neurosurgery, Medical…
• Development of the CAVEMAN Human Body Model: Validation of Lower Extremity Sub-Injurious Response to Vertical Accelerative Loading 
  Authors: Kent Butz, Chad Spurlock, Rajarshi Roy, Cameron Bell, Paul Barrett, Aaron Ward, Xudong Xiao, Allen Shirley, Colin Welch, Kevin…
• Human Foot-Ankle Injuries and Associated Risk Curves from Under Body Blast Loading Conditions
  Authors: Sajal Chirvi, Narayan Yoganandan, Mike Schlick, William Curry—Department of Neurosurgery, Medical College of Wisconsin/VA Medical Center; Frank Pintar—Department of…
• Human Shoulder Response to High Velocity Lateral Impact
  Authors: Matthieu Lebarbé—CEESAR, Nanterre, France; Philippe Vezin—Univ Lyon, Université Claude Bernard Lyon 1, IFSTTAR, LBMC UMR_T9406, F69622, Lyon, France; Frédéric…
• Neck Injury Response in High Vertical Accelerations and its Algorithmical Formalization to Mitigate Neck Injuries
  Authors: Julie Klima, Jian Kang, AnnMarie Meldrum, Steven Pankiewicz—Tank Automotive Research, Development, and Engineering Center Abstract Tank Automotive Research, Development…
• New Reference PMHS Tests to Assess Whole-Body Pedestrian Impact Using a Simplified Generic Vehicle Front-End
  Authors: Eric Song, Philippe Petit, and Xavier Trosseille—LAB PSA Renault; Jérôme Uriot, Pascal Potier, and Denis Dubois—CEESAR; Richard Douard—Université Paris…
• Occupant Kinematics in Simulated Autonomous Driving Vehicle Collisions: Influence of Seating Position, Direction and Angle
  Authors: Yuichi Kitagawa, Shigeki Hayashi, Katsunori Yamada, Mitsuaki Gotoh—Toyota Motor Corporation Abstract This two-part study analyzed occupant kinematics in simulated…
• Optimal Specifications for the Advanced Pedestrian Legform Impactor
  Authors: Takahiro Isshiki, Jacobo Antona-Makoshi, and Atsuhiro Konosu—Japan Automobile Research Institute; Yukou Takahashi—Japan Automobile Manufacturers Association Abstract This study addresses…
• Optimizing Seat Belt and Airbag Designs for Rear Seat Occupant Protection in Frontal Crashes
  Authors: Jingwen Hu and Matthew P. Reed—University of Michigan Transportation Research Institute; Jonathan D. Rupp—Emory University School of Medicine; Kurt…
• Strain-rate Dependency of Axonal Tolerance for Uniaxial Stretching
  Authors: Hiromichi Nakadate, Evrim Kurtoglu, Hidenori Furukawa, Shoko Oikawa, and Shigeru Aomura—Graduate School of System Design, Tokyo Metropolitan University; Akira…

Looking for Something Else?