Authors: Sakib Ul Islam, Kewei Bian, Haojie Mao, Western University
Abstract
Developing finite element (FE) brain models with detailed sulci and gyri remains challenging when uniform-density, high-quality hexahedral meshes are required. Previous FE brain models have represented sulci using voxel-based, nonuniform-density hexahedral, or tetrahedral meshes. This study developed a parametric series of multi-block all-hexahedral brain models in which cortical folding was introduced progressively from the same block structure, ranging from a smooth surface to shallow sulci, to isolate the effect of cortical geometry on predicted strain. A boundary-projection method generated three configurations: Smooth, Wrap 1 (shallow sulci), and Wrap 2 (deeper sulci), with identical connectivity, element count (952,116 hexahedral brain elements, approximately 1.1 mm), and material properties. The models were evaluated under three reconstructed cadaveric head impacts against neutral-density-target cluster strain histories. Maximum principal strain (MPS), MPS at the highest-strain cortical sites, and cumulative strain damage measures were compared using stiffness-based and viscous hourglass controls for cerebrospinal fluid elements. All models showed comparable agreement with experimental deformation histories. Increasing sulcal-depth representation shifted elevated MPS from broad superficial regions toward represented sulci and reduced strain over adjacent gyral crowns. Wrap 2 showed about 50% higher peak MPS than Smooth at its own hotspots but 15% lower at those of Smooth, indicating a shift of strain from the gyral crowns toward the sulci. Because no experimental target exists for cortical strain, the results represent a relative comparison of geometries. This multi-block approach enables the mechanical influence of cortical geometry to be quantified while preserving element count, mesh quality, and meshing pattern across models.

Type: Full Paper, Technical
© Stapp Association, 2026
Access Additional Papers from the 70th Stapp Car Crash Conference
View additional full papers from the 70th Stapp Car Crash Conference.
- A Dynamic Safety System for Mitigating the Severity of Motor Vehicle AccidentsAuthors: William G. Broadhead, Theodore Zinke, Automotive Safety Research, Inc.; Jacqueline G. Paver, Center for Injury Research Abstract The advent…
- Age-Associated Pediatric Head and Neck Injury Patterns in Motor Vehicle Crashes: A Multi-Source Descriptive AnalysisAuthors: Karthik Somasundaram, Klaus Driesslein, Dale Halloway, Medical College of Wisconsin; Valentina Graci, Children’s Hospital of Philadelphia/Drexel University Abstract Objective:…
- Biofidelity Evaluation of THOR-AV 50th Percentile Male Dummy in 50 km/h Frontal Impact ConditionsAuthors: Z. Jerry Wang, Humanetics Innovation Solutions; Matthew P. Reed, University of Michigan Transportation Research Institute Abstract This paper provides…
- Biomechanical Responses and Injuries of Male Post Mortem Human Subject Seated in Production Seats in Moderate-to-High-Speed Rear ImpactsAuthors: Yun-Seok Kang, Reed Finfrock, Timothy Wensink, Randee Hunter, Amanda M. Agnew, Injury Biomechanics Research Center, The Ohio State University;…
- Characterization of Rider and Powered Two-Wheeler Kinematics in Full-Scale PMHS Crash TestingAuthors: Daniel A. Meringolo, Yun-Seok Kang, Injury Biomechanics Research Center, The Ohio State University; Jolyon Carroll, Shiyang Meng, Autoliv Research…
- Evaluation of 50th Percentile Male ATD Biofidelity in Moderate-Speed Rear Impact Sled Tests Compared to PMHSAuthors: Angela Tesny, William Millis, Colton Thomas, Kevin Moorhouse, Jason Stammen, National Highway Traffic Safety Administration, Vehicle Research and Test…
- Factors and Mechanisms Related to Skeletal Ankle Injury during Frontal Motor Vehicle CollisionsAuthors: Devon L. Albert, University of Michigan Transportation Research Institute; Elizabeth M. McNeil, National Highway Traffic Safety Administration; Warren N….
- Historical Review of the Use of the Hybrid III ATDs in Rear Impact Testing and ValidationAuthors: Priya Prasad, Prasad Engineering, LLC; David C. Viano, Pro-Biomechanics, LLC; Chantal S. Parenteau, Roger Burnett , Design Research Engineering;…
- Identifying Representative Front Crash Test Conditions from EDR Pulses and Body-Region Injury PatternsAuthors: Matthew L. Brumbelow, Insurance Institute for Highway Safety Abstract As front crashworthiness has improved in relatively low-exposure, high-severity configurations,…
- Influence of Joint Structure in Multibody Model on Behavior Analysis of Crash Test DummyAuthors: Masatoshi Usui, Yasuhiro Matsui, Naruyuki Hosokawa, Yoshinori Tanaka, National Traffic Safety and Environment Laboratory, Tokyo, Japan Abstract This study…
- Parametric Investigation of the Effect of Brain Cortical Surface Representation on Strain Prediction: From a Smooth Cortex to Shallow Sulci in Multi-Block-Based All-Hexahedral Head ModelsAuthors: Sakib Ul Islam, Kewei Bian, Haojie Mao, Western University Abstract Developing finite element (FE) brain models with detailed sulci…
- Quantitative Assessment of Neck Injury Criteria Against Tissue-Level Response Using a Detailed Computational Neck Model in Frontal, Lateral, Rear, and Oblique ImpactsAuthors: Matheus A. Correia, Duane S. Cronin, University of Waterloo Abstract Neck injury criteria are increasingly used with computational Human…
- Relevant Vehicle Front-End Components for Pedestrian Laboratory Testing to Address Real-World Pedestrian Injuries When Struck by Passenger Vehicles With High Hood HeightsAuthors: Becky Mueller, Jessica Jermakian, Insurance Institute for Highway Safety Abstract In the United States, pedestrian deaths account for 18%…
- Response of the Male and Female PMHS Foot and Ankle to Axial LoadingAuthors: Warren N. Hardy, The Ohio State University; Elizabeth M. McNeil, National Highway Traffic Safety Administration; Devon L. Albert, University…
- Rotations of Rearward-Facing Child Restraint Systems and Excursions of the Paediatric Head During Frontal and Frontal-Oblique Impact Sled TestsAuthors: Declan A. Patton, Children’s Hospital of Philadelphia Abstract Objective: For a paediatric anthropomorphic test device (ATD) seated in rearward-facing…
- The Use of a Pre-Pretensioner Belt to Reduce Forward Leaning in Vehicle Occupants in Anticipation of a Pre-Crash ManeuverAuthors: Maitland Witmer, Valentina Graci, Children’s Hospital of Philadelphia/Drexel University; Madeline Griffith, Children’s Hospital of Philadelphia Abstract The objective of…
- Time-history Analysis of Model Validation and Corridor ComparisonAuthors: Guy Nusholtz Abstract To evaluate how data quality can influence the analysis of biomechanical impact tests, computationally generated sets…
- Video-based Accurate Kinematics Estimation from High-Speed Human MotionAuthors: Qiantailang Yuan, Svein Kleiven, Xiaogai Li, KTH Royal Institute of Technology Abstract Human posture and kinematics estimation from video…
- Voxel-Interpolation and Mapping Applied to Multiblock Hexahedral Finite Element Head Models Enables Response Metric Spatial ComparisonAuthors: Michael C. Bustamante, Duane S. Cronin, University of Waterloo Abstract Finite element (FE) head models (HMs) are used to…