Biomechanical Responses and Injury Assessment of Post Mortem Human Subjects in Various Rear-facing Seating Configurations

Authors: Yun-Seok Kang—Injury Biomechanics Research Center, The Ohio State University; Jason Stammen and Kevin Moorhouse—National Highway Traffic Safety Administration, Vehicle Research and Test Center; Rakshit Ramachandra, Amanda M. Agnew and John H. Bolte IV—Injury Biomechanics Research Center, The Ohio State University; Alena Hagedorn, Colton Thomas and Hyun Jung Kwon—Transportation Research Center

Abstract

The objective of this study was to generate biomechanical corridors from post-mortem human subjects (PMHS) in two different seatback recline angles in 56 km/h sled tests simulating a rear-facing occupant during a frontal vehicle impact. PMHS were placed in a production seat which included an integrated seat belt. To achieve a repeatable configuration, the seat was rigidized in the rearward direction using a reinforcing frame that allowed for adjustability in both seatback recline angle and head restraint position. The frame contained instrumentation to measure occupant loads applied to the head restraint and seatback. To measure PMHS kinematics, the head, spine, pelvis, and lower extremities were instrumented with accelerometers and angular rate sensors. Strain gages were attached to anterior and posterior aspects of the ribs, as well as the mid-shaft of the femora and tibiae, to determine fracture timing. A chestband was installed at the mid sternum to quantify chest deformation. Biomechanical corridors for each body and seat location were generated for each recline angle to provide data for quantitatively evaluating the biofidelity of ATDs and HBMs. Injuries included upper extremity injuries, rib fractures, pelvis fractures, and lower extremity injuries. More injuries were documented in the 45-degree recline case than in the 25-degree recline case. These injuries are likely due to the excessive ramping up and corresponding kinematics of the PMHS. Biomechanical corridors and injury information presented in this study could guide the design of HBMs and ATDs in rigid, reclined, rear-facing seating configurations during a high-speed frontal impact.

Type: Full Paper

Keywords: THOR-50M, Hybrid III, ATD, dummy, injury response, injury risk, crash test, CISS, accident data, frontal impact

© Stapp Association, 2020

Access Additional Papers from This Volume

View additional Full Papers from the Stapp Car Crash Journal, Volume 64.

• Analysis of Kinematic Response of Pediatric Occupants Seated in Naturalistic Positions in Simulated Frontal Small Offset Impacts: With and Without Automatic Emergency Braking
  Authors: Jalaj Maheshwari, Shreyas Sarfare, and Aditya Belwadi—Center for Injury Research and Prevention, Children’s Hospital of Philadelphia; Clayton Falciani—Center for…
• Application of Deep Learning Methods for Pedestrian Collision Detection Using Dashcam Videos
  Authors: Shouhei Kunitomi and Shinichi Takayama—Japan Automobile Research Institute; Masayuki Shirakawa—Japan Automobile Manufacturers Association, Inc. Abstract The goal of this…
• Biomechanical Responses and Injury Assessment of Post Mortem Human Subjects in Various Rear-facing Seating Configurations
  Authors: Yun-Seok Kang—Injury Biomechanics Research Center, The Ohio State University; Jason Stammen and Kevin Moorhouse—National Highway Traffic Safety Administration, Vehicle…
• Effects of Technology on Drivers’ Behavior during Backing Maneuvers
  Authors: Yasuhiro Matsui—National Traffic Safety and Environment Laboratory, Japan; Shoko Oikawa—Tokyo Metropolitan University, Japan Abstract This paper examines how vehicle…
• Evaluation of Rotation Reduction Features in Infant and Extended-Use Convertible Child Restraint Systems during Frontal and Rear Impacts
  Authors: Declan A. Patton, Aditya N. Belwadi, and Jalaj Maheshwari—Center for Injury Research and Prevention, Children’s Hospital of Philadelphia; Kristy…
• Geometrical and Mechanical Characterization of the Abdominal Fold of Obese Post Mortem Human Subjects for Use in Human Body Modelling
  Authors: Matthieu Lebarbé—CEESAR (France); Philippe Beillas, Tomas Janak, and Yoann Lafon—Univ Lyon, Univ Claude Bernard Lyon 1, Univ Gustave Eiffel,…
• Kinematic and Injury Response of Reclined PMHS in Frontal Impacts
  Authors: Rachel Richardson, John-Paul Donlon, Mohan Jayathirtha, Jason L. Forman, Greg Shaw, Bronislaw Gepner, and Jason R. Kerrigan—University of Virginia…
• Variations in User Implementation of the CORA Rating Metric
  Author: Devon L. Albert — Center for Injury Biomechanics, Department of Biomedical Engineering and Mechanics, Virginia Tech Abstract The CORA…

Looking for Something Else?