Authors: Yuichi Kitagawa, Shigeki Hayashi, Katsunori Yamada, Mitsuaki Gotoh—Toyota Motor Corporation
Abstract
This two-part study analyzed occupant kinematics in simulated collisions of future automated driving vehicles in terms of seating configuration. In part one, a frontal collision was simulated with four occupants with the front seats reversed. The left front seat occupant was unbelted while the others were belted. In part two of the study, occupant restraint was examined in various seating configurations using a single seat model with a three-point seatbelt. The seat direction with respect to impact was considered as forward, rearward, and lateral facing in 45 degree increments. The effect of seat recline was also studied in the forward-facing and rear-facing cases by assuming three positions: driving position, resting position and relaxed position. Occupants were represented by human body finite element models. The results of part one showed that the front seat (rear-facing) occupants were restrained by the seatback, resulting in T1 forward displacement less than 100 mm; the rear seat occupants were restrained by the seatbelt resulting larger T1 forward displacement more than 500 mm. The results of the part two showed the directional dependence of occupant restraint. Greater T1 displacements were observed when the occupant faced lateral or front oblique. However, the seatbelt provided some restraint in all directions considered. The seatback generated contact force to the occupant when it was in the impact direction, including the lateral directions. The relaxed position allowed increased excursion compared to the driving position when the occupant faced rearward, but the magnitude of this increase was lower with lower impact speed.
Type: Full Paper
Keywords: Autonomous driving vehicle, seating configuration, vehicle collision, human FE model
© Stapp Association, 2017
Access Additional Papers from This Volume
View additional Full Papers from the Stapp Car Crash Journal, Volume 61.
- Analysis of Repeatability and Reproducibility Standards of ATD Response for the Correlation MethodAuthors: Lan Xu and Guy Nusholtz—FCA US LLC, USA Abstract Statistical methods, using the entire time-history, can be used to…
- Application of Extreme Value Theory to Crash Data AnalysisAuthors: Lan Xu and Guy Nusholtz—FCA US LLC, USA Abstract A parametric model obtained by fitting a set of data…
- Association of Impact Velocity with Serious-Injury and Fatality Risks to Cyclists in Commercial Truck-Cyclist AccidentsAuthors: Yasuhiro Matsui—National Traffic Safety and Environment Laboratory, Japan; Shoko Oikawa—Tokyo Metropolitan University; Kazuhiro Sorimachi, Akira Imanishi, and Takeshi Fujimura—Isuzu…
- Biofidelity Evaluation of the THOR and Hybrid III 50th Percentile Male Frontal Impact Anthropomorphic Test DevicesAuthors: Daniel Parent, Matthew Craig, Kevin Moorhouse—National Highway Traffic Safety Administration Abstract The objective of this study is to present…
- Biomechanics of Lumbar Motion-Segments in Dynamic CompressionAuthors: Mike W. J. Arun, Prasannaah Hadagali, Klaus Driesslein, William Curry, Narayan Yoganandan, and Frank A. Pintar—Department of Neurosurgery, Medical…
- Development of the CAVEMAN Human Body Model: Validation of Lower Extremity Sub-Injurious Response to Vertical Accelerative Loading Authors: Kent Butz, Chad Spurlock, Rajarshi Roy, Cameron Bell, Paul Barrett, Aaron Ward, Xudong Xiao, Allen Shirley, Colin Welch, Kevin…
- Human Foot-Ankle Injuries and Associated Risk Curves from Under Body Blast Loading ConditionsAuthors: Sajal Chirvi, Narayan Yoganandan, Mike Schlick, William Curry—Department of Neurosurgery, Medical College of Wisconsin/VA Medical Center; Frank Pintar—Department of…
- Human Shoulder Response to High Velocity Lateral ImpactAuthors: Matthieu Lebarbé—CEESAR, Nanterre, France; Philippe Vezin—Univ Lyon, Université Claude Bernard Lyon 1, IFSTTAR, LBMC UMR_T9406, F69622, Lyon, France; Frédéric…
- Neck Injury Response in High Vertical Accelerations and its Algorithmical Formalization to Mitigate Neck InjuriesAuthors: Julie Klima, Jian Kang, AnnMarie Meldrum, Steven Pankiewicz—Tank Automotive Research, Development, and Engineering Center Abstract Tank Automotive Research, Development…
- New Reference PMHS Tests to Assess Whole-Body Pedestrian Impact Using a Simplified Generic Vehicle Front-EndAuthors: Eric Song, Philippe Petit, and Xavier Trosseille—LAB PSA Renault; Jérôme Uriot, Pascal Potier, and Denis Dubois—CEESAR; Richard Douard—Université Paris…
- Occupant Kinematics in Simulated Autonomous Driving Vehicle Collisions: Influence of Seating Position, Direction and AngleAuthors: Yuichi Kitagawa, Shigeki Hayashi, Katsunori Yamada, Mitsuaki Gotoh—Toyota Motor Corporation Abstract This two-part study analyzed occupant kinematics in simulated…
- Optimal Specifications for the Advanced Pedestrian Legform ImpactorAuthors: Takahiro Isshiki, Jacobo Antona-Makoshi, and Atsuhiro Konosu—Japan Automobile Research Institute; Yukou Takahashi—Japan Automobile Manufacturers Association Abstract This study addresses…
- Optimizing Seat Belt and Airbag Designs for Rear Seat Occupant Protection in Frontal CrashesAuthors: Jingwen Hu and Matthew P. Reed—University of Michigan Transportation Research Institute; Jonathan D. Rupp—Emory University School of Medicine; Kurt…
- Strain-rate Dependency of Axonal Tolerance for Uniaxial StretchingAuthors: Hiromichi Nakadate, Evrim Kurtoglu, Hidenori Furukawa, Shoko Oikawa, and Shigeru Aomura—Graduate School of System Design, Tokyo Metropolitan University; Akira…