Authors: Karthik Somasundaram, John R. Humm, Narayan Yoganandan, Hans Hauschild, Klaus Driesslein, and Frank A. Pintar—Medical College of Wisconsin and VA Medical Center
Abstract
The American population is getting heavier and automated vehicles will accommodate unconventional postures. While studies replicating mid-size and upright fore-aft seated occupants are numerous, experiments with post-mortem human subjects (PMHS) with obese and reclined occupants are sparse. The objective of this study was to compare the kinematics of the head-neck, torso and pelvis, and document injuries and injury patterns in frontal impacts. Six PMHS with a mean body mass index of 38.2 ± 5.3 kg/m2 were equally divided between upright and reclined groups (seatback: 23°, 45°), restrained by a three-point integrated belt, positioned on a semi-rigid seat, and exposed to low and moderate velocities (15, 32 km/h). Data included belt loads, spinal accelerations, kinematics, and injuries from x-rays, computed tomography, and necropsy. At 15 km/h speed, no significant difference in the occupant kinematics and evidence of orthopedic failure was observed. At 32 km/h speed, the primary difference between the cohorts was significantly larger Z displacements in the reclined occupant at the head (190 ± 32 mm, vs. 105 ± 33 mm p < 0.05) and femur (52 ± 18 mm vs. 30 ± 10 mm, p < 0.05). All the moderate-speed tests produced at least one thorax injury. Rib fractures were scattered around the circumference of the rib-cage in the upright, while they were primarily concentrated on the anterior aspect of the rib-cage in two reclined specimens. Although MAIS was the same in both groups, the reclined specimens had more bi-cortical rib fractures, suggesting the potential for pneumothorax. While not statistical, these results suggest enhanced injuries with reclined obese occupants. These results could serve as a data set for validating the response of restrained obese anthropometric test device (ATDs) and computational human body models.
Type: Full Paper
Keywords: Biomechanics, obese, cadaver, experiments, injury, upright, recline
© Stapp Association, 2022
Access Additional Papers from This Volume
View additional Full Papers from the Stapp Car Crash Journal, Volume 66.
- A Comparison of the Mid-Size Male THOR and Hybrid III ATDs in Vehicle Frontal Crash TestsAuthors: Chris O’Connor, Agnes Kim, and Tim Barrette—Ford Motor Company; Jeff Dix—Nissan North America Abstract In order to evaluate the…
- Driving Behavior during Right-Turn Maneuvers at Intersections on Left-Hand Traffic RoadsAuthors: Yasuhiro Matsui and Naruyuki Hosokawa—National Traffic Safety and Environment Laboratory, Japan; Shoko Oikawa—Tokyo Metropolitan University, Japan Abstract In Japan,…
- Effect of Tissue Erosion Modeling Techniques on Pedestrian Impact KinematicsAuthors: Daniel Grindle and Costin Untaroiu—Department of Biomedical Engineering and Mechanics (BEAM), Center for Injury Biomechanics, Virginia Tech Abstract The…
- Investigation of Potential Injury Patterns and Occupant Kinematics in Frontal Impact with PMHS in Reclined PosturesAuthors: Pascal Baudrit and Jérôme Uriot—CEESAR (Nanterre – France); Olivier Richard and Matthieu Debray—Faurecia Automotive Seating (France) Abstract The reality…
- Ligaments Laxity and Elongation at Injury in Flexed knees during Lateral Impact ConditionsAuthors: Sahar Benadi—LAB PSA Renault (Nanterre – France), Univ Lyon, Univ Gustave Eiffel, Univ Claude Bernard Lyon 1; Xavier Trosseille…
- Lower Extremity Validation of a Human Body Model for High Rate Axial Loading in the Underbody Blast EnvironmentAuthors: Zachary S. Hostetler, Juliette Caffrey, Jazmine Aira, and F. Scott Gayzik—Wake Forest School of Medicine – Biomedical Engineering Abstract…
- Obese Occupant Response in Reclined and Upright Seated Postures in Frontal ImpactsAuthors: Karthik Somasundaram, John R. Humm, Narayan Yoganandan, Hans Hauschild, Klaus Driesslein, and Frank A. Pintar—Medical College of Wisconsin and…
- Understanding Head Injury Risks during Car-to-Pedestrian Collisions Using Realistic Vehicle and Detailed Human Body ModelsAuthors: Kalish Gunasekaran and Sakib Ul Islam—Mechanical and Materials Engineering, Western University, Canada; Haojie Mao—Mechanical and Materials Engineering, School of…